All gear AEHD series - AEHD-4

JAMNAGAR MACHINE TOOLS were established in the year 1976 with an aim of high ambitions and to manufacture products with high precision and high quality. At present more than 6000 machines are running successfully all over the India as well as abroad.

  • Technical Data
  • Model
  • Main Spindle
  • Thread
  • Feeds
  • Electricals
  • Standard Accessories
  • Extra Accessories
  • Note

Center Height over flat bed ways 400mm(16"inch)
Swing of Bed 457mm(18"Inch)
Swing Over Bed 770mm
Swing Over Cross Slide 500mm
Swing in Gap 1170mm
Length of Gap in front of Face Plate 180mm
Bed Type

Model Admit between Centres Length of Bed Floor Space Occupied (m.m) Aprox. Weight in kgs Aprox. Weight in kgs
AEHD-1 700mm 7' ft 2660 * 1600 2500 2800
AEHD-2 1300mm 9' ft 3140 * 1600 2700 3100
AEHD-3 1600mm 10' ft 3500 * 1600 2900 3400
AEHD-4 2200mm 12' ft 4110 * 1600 3000 3500
AEHD-5 2800mm 14' ft 4720 * 1600 3200 3700
AEHD-6 3400mm 16' ft 5330 * 1600 3600 4200
AEHD-7 4000mm 18' ft 5940 * 1600 4000 4600

Type of Spindle Nose A2-8
Spindle Morse Taper MT-6
Spindle Adapter Morse MT-5
Taper Spindle Speeds Nos. /RPM / Range 09(18/45/65/70/90/170/220/240/310)
Spindle Mounting on Tapper Roller Bearing
TAIL STOCK SPINDLE: Diameter: 75m.m / Travel:250m.m / Morse Taper: MT-5
LEADING SCREW : Diameter / Threads 45m.m. /4TPI

Nos.of Threads / Range For Fully Norton Gearbox Metric 24/ 0.5m.m. TO 15 m.m. Pitch
Non.of Threads/Range For Fully Norton Gearbox Inch 44 / 2 TO 60 TPI

Nos.of Feeds / Range For Fully Norton Gearbox Longitudinal 40/0.066 TO 2m.m. / rev. of spindle
Nos.of Feeds / Range For Fully Norton Gearbox Cross 40 / 0.0165 TO 0.5 m.m. / rev. of spindle

Electirc motor of 5HP /3.72 k.w. 3 Phase 960 RPM

Flame Hardened bed ways Chuck back plate 1 no centrer adapter Dead centres (MT - 4) 2 nos
Tool Post Spanner Motor Pulley Thread dial indicator and Norton gearbox

Face plate Carrier plate steady rest
follow rest Dog/ True Chuck Taper turning attachment
coolant pump with tank and fitting rear tool post with extended cross slide Electrical Switch shaft and chip guard
Elcectricals (Motor,Panel board, Wirings, Push button Switches, V-belts and fittings)

As improvements are constantiy made in our machines, the above illustrations, specification, dimensions and technical data are subject to modifications and change without prior notice and not binding on us.


Download Brochure »


Company

logo logo logo

Download Center

Quick Contact

JAMNAGAR MACHINE TOOLS
Punitnagar Road,Behind Rajkamal Petrol Pump,
Gondal Road, Rajkot - 360004
Phone : (+91) 982 569 9559
Phone : (+91) 982 521 3170
Email: info@olympiclathe.com