Heavy duty all gear – AHD-5

JAMNAGAR MACHINE TOOLS were established in the year 1976 with an aim of high ambitions and to manufacture products with high precision and high quality. At present more than 6000 machines are running successfully all over the India as well as abroad.

  • TECHNICAL DATA
  • Model
  • Main Spindle
  • THREAD & FEEDS
  • ELECTRICALS
  • STANDARD ACCESSORIES
  • EXTRA ACCESSORIES
  • NOTE

STD C.H. 12” C.H.
Centre Height over flat bed ways : 267 m.m. 305 m.m.
Swing Over Bed : 525 m.m. 600 m.m.
Swing Over Cross Slide : 300 m.m. 375 m.m.
Swing In Gap : 830 m.m. 910 m.m.
Length of Gap in front of Face Plate : 200 m.m. 200 m.m.
Width of Bed :STANDARD 325 m.m. (13”) / OPTIONAL : 375 m.m. (15”)

MODEL ADMIT BETWEEN CENTRES LENGTH OF BED Aprox. Weight in kgs.
Nett.
AHD-1 525 m.m. 1675 m.m. (5’-6”) 1450
AHD-2 1000 m.m. 2135 m.m. (7’) 1500
AHD-3 1600 m.m. 2745 m.m. (9’) 1650
AHD-4 1900 m.m. 3050 m.m. (10’) 1900
AHD-5 2500 m.m. 3660 m.m. (12’) 2050
AHD-6 3100 m.m. 4270 m.m. (14’) 2350
AHD-7 3710 m.m. 4875 m.m.(16’) 2700

Type of Spindle NoseA 2 – 6
Spindle Morse Taper MT-6
Spindle Adapter MorseMT-4
TaperSpindle Speeds12 (30, 43, 55, 85, 115, 160, 210,
Nos. / RPM / Range 285, 400, 545, 785, 1060. RPM )
Spindle Mounting on Taper Roller Bearings

THREAD

Nos. of Threads / Range For Fully orton Gearbox) Metric :
Inch :
17 / 0.5 m.m. To 15 m.m. Pitch
40 / 2 to 60 TPI


FEEDS

Nos. of Feeds / Range For Fully norton Gearbox) Longitudinal :
Cross :
40 / 0.066 to 2 m.m. / rev. of spindle
40 / 0.0165 to 0.5 m.m. / rev. of spindle

Electirc motor of 3 HP / 2.25 k.w. 3 Phase 1440 RPM with Panel board wirings
over load relay Pushbutton switches V-belts and fittings

Flame Hardened bed ways Chuck back plate 1 no centre adapter Dead centres (MT - 4) 2 nos
Tool Post Spanner Motor pulley Thread dial indicator Change gear set - 1 (For metric and inch both) and Norton gearbox

Face plate Carrier plate steady rest
follow rest Taper turning attachment ortoned coolant pump with tank and fittings
Rear tool post with extended cross slide Chuck back plates (Extra) Electrical Switch shaft and chip guard
and Electricals (Motor, Panel board, Wirings, Push button Switches, V-belts and fittings)

(1) As improvements are constantly made in our machines, the above illustrations, specifications, dimensions and technical data are subject to modifications and change without prior notice and not binding on us.
(2) The descriptions of standard accessories confirms to it's list and not the photograph of the machine show in the catalogue.


Download Brochure »


Company

logo logo logo

Download Center

Quick Contact

JAMNAGAR MACHINE TOOLS
Punitnagar Road,Behind Rajkamal Petrol Pump,
Gondal Road, Rajkot - 360004
Phone : (+91) 982 569 9559
Phone : (+91) 982 521 3170
Email: info@olympiclathe.com